Tag Archives: 3dprint

Storm Trooper Death Mask – Design by Paul Braddock. Printed at 75% scale and .15mm layer height on The Original Prusa i3 MK2s, with Hatchbox white pla. Supports removed really cleanly even from the deep eye socket

Storm Trooper Death Mask – Design by Paul Braddock. Printed at 75% scale and .15mm layer height on The Original Prusa i3 MK2s, with Hatchbox white pla. Supports removed really cleanly even from the deep eye socket! #3dprint #3dprintoftheday #prusaresearch #prusai3 #prusai3mk2 #3dprinting #hatchbox3d Continue reading

Posted in Total Anarchy | Tagged , , , , , , | Leave a comment

Vase is done printing, 19 hours and change. This looks pretty neat backlit and the buttress tubes give it tons of strength. Ended up with quite a few artifacts, so maybe I need to tweak some extrusion settings

Vase is done printing, 19 hours and change. This looks pretty neat backlit and the buttress tubes give it tons of strength. Ended up with quite a few artifacts, so maybe I need to tweak some extrusion settings. #3dprint #3dprintoftheday #3dprinting #prusaresearch #prusai3 #prusai3mk2 #fusion360 Continue reading

Posted in Total Anarchy | Tagged , , , , , , | Leave a comment

Halfway through printing this vase design (9 hours in) and it looks a little rougher than I would like. Not sure if I have a bit of over extrusion with this PLA but so far the vertical buttress tubes look pretty cool. Final photos to come at the end of the day

Halfway through printing this vase design (9 hours in) and it looks a little rougher than I would like. Not sure if I have a bit of over extrusion with this #hatchbox PLA but so far the vertical buttress tubes look pretty cool. Final photos to come at the end of the day. #3dprint #3dprintoftheday #3dprinting #prusai3 #originalprusai3mk2 #prusaresearch #fusion360 #hatchbox3d Continue reading

Posted in Total Anarchy | Tagged , , , , , , , , | Leave a comment

I was never able to find a replacement 45 adapter for my Audio Technica Mister Disc. So I decided to just 3D print one! If anyone else is in need I put an Etsy link in my bio and I can print one for you. These little things are so hard to find, and I doubt AT will ever make them again

I was never able to find a replacement 45 adapter for my Audio Technica Mister Disc. So I decided to just 3D print one! If anyone else is in need I put an Etsy link in my bio and I can print one for you. These little things are so hard to find, and I doubt AT will ever make them again. #soundburger #misterdisc #at770 #at727 #vinyl #vinyligclub #vinyljunkie #vinyloftheday #vinylgeek #vinyladdiction #recordplayer #records #cratedigging #cratedigger #instavinyl #vinylcollection #vinylcollector #instamusic #music #vintageelectronics #vintageradio #turntable #turntables #3dprint #3dprinting Continue reading

Posted in Total Anarchy | Tagged , , , , , , , , , , , , , , , , , , , , , , , , | Leave a comment